Researched and independently reviewed with AI. Not personally reviewed by a human editor.
Machine reference
Needles, bobbins, feet and other details for this model. Check the requirements before choosing parts.
Before choosing a part
Start with these documented details. Read the requirements with each answer before choosing a needle, bobbin or foot.
System 130/705H. The supplied needle case has standard needles in sizes 70, 80 and 90, stretch needles in 75 and 90 (marked yellow), and jeans needles in 90 and 100 (marked blue).
Requirements and sources →Not yet confirmed here: Manufacturer accessory group, Presser-foot shank type, Foot attachment, Foot holder / mount, Foot interface / generation, Bobbin type / class, Bobbin material, Bobbin diameter, Bobbin height, Hook type, Maximum stitch / zigzag width, Feed system, Bobbin loading direction. What is still to confirm →
Other names, regional versions and related models have not been confirmed here. A shared manual, product line or accessory group does not identify the machine's family.
Both instructions are as printed on PDF page 11 and PDF page 71 (printed pages 11 and 71). The manual names only original Husqvarna Viking green bobbins and prints no class or part number, so no other bobbin is confirmed here.
Documents and page references →The manual recommends system 130/705H and names no other, so no other system or equivalence is inferred. The sizes are those of the supplied needle case on PDF page 16 (printed page 16).
Documents and page references →Turn off the main switch before changing a foot (PDF page 15, printed page 15). Standard foot B is not the optional transparent foot B (PDF page 60, printed page 60). No shank standard, part numbers or third-party foot fit are stated or inferred.
Documents and page references →The manual prints widths only for listed stitches, such as on PDF page 46 (printed page 46) and PDF page 48 (printed page 48), and no maximum stitch width for the machine, so none is given here. Optional cards are sold separately.
Documents and page references →Use the free motion quilting and stippling section on PDF page 50 (printed page 50). The Sensor Q Foot is an optional accessory; the manual gives no part number or fit for it beyond this machine’s setting.
Documents and page references →Only with the optional Embroidery Theme, which is sold separately (PDF page 76, printed page 76). No hoop size, part number or other embroidery unit is given or confirmed here.
Documents and page references →Turn off the main switch first. Use “Placing the Bobbin in the Machine” on PDF page 11 (printed page 11); the steps are the manual’s own and are not rewritten here.
Documents and page references →Turn off the main switch first, as the safety instructions on PDF page 2 also say. Then use “Changing the Needle” on PDF page 16 (printed page 16); the steps are the manual’s own and are not rewritten here.
Documents and page references →The safety instructions read: “Always unplug this sewing machine from the electric outlet immediately after using and before cleaning.” (PDF page 2, unnumbered) Then use “Clean the Bobbin Area” on PDF page 69 (printed page 69).
Documents and page references →These are the manual’s three checks for “Presser foot will not go down?” on PDF page 71 (printed page 71), given as printed. No other cause or repair is covered here.
Documents and page references →Manuals, parts books & more
Publisher links below distinguish a matched file from a listing.
Choose the document for your task: an instruction manual, service manual, parts list and accessory guide answer different questions.
About this document & page references →
Instruction manualEdition: "v. 1.0" printed at the foot of the safety page (physical 2); no edition date ("current at the time of printing", physical 71)
Models referenced here: Husqvarna Viking Quilt Designer II
Read the source document ↗
We checked that this file matched the source used here on 2026-11-05. The publisher may later replace its file.
Read the model-specific requirements with each answer before choosing parts.
System 130/705H. The supplied needle case has standard needles in sizes 70, 80 and 90, stretch needles in 75 and 90 (marked yellow), and jeans needles in 90 and 100 (marked blue).
Turn off the main switch first, then follow "Changing the Needle" on PDF 16 / printed 16. The flat side faces away from you.
The manual says to use only original Husqvarna Viking green bobbins, and if the bobbin alarm doesn't work, to clean lint from the bobbin area and use only authentic Husqvarna green style bobbins. No bobbin class or part number is printed.
Turn off the main switch, then follow "Placing the Bobbin in the Machine" on PDF 11 / printed 11: the bobbin goes in with its mark facing up and the thread to the left, and the thread is pulled into the tension spring until it clicks.
The manual describes presser feet A, B, C, D, E, H, J, P, R and S plus the Sensor Buttonhole Foot. Foot P is for piecing quilt blocks and has distance marks 1/4" (6 mm) and 1/8" (3 mm). Turn off the main switch before changing a foot; it snaps on with a cross pin (PDF 15 / printed 15).
Specifications apply to the named model and document edition. Read any setup, fabric or safety requirements with the answer.
From Stitch d-Cards that slide into the slot on the right side of the machine; each holds up to 35 stitches. Four come with the machine: Utility Stitches A1, Fashion Stitches N1, Quilt and Appliqué Stitches E1 and Block Letters Alphabet O1. More Stitch d-Cards are optional and sold separately. If the machine won't sew, check that a Stitch d-Card is inserted.
No. "No lubrication (oiling) is needed." Turn off the main switch and clean it often; to clean the bobbin area, follow "Clean the Bobbin Area" on PDF 69 / printed 69.
Only with the optional Embroidery Theme, which includes an embroidery unit, embroidery hoops in different sizes and two Embroidery d-Cards. The machine has an embroidery unit connection socket at the back (PDF 5 / printed 5).
Yes: lower the feed teeth with the dial on the front of the free arm and use presser foot R; the manual's free motion quilting and stippling section is on PDF 50 / printed 50. For very thick or puffy quilts it mentions the optional Sensor Q Foot.
Turn the machine off and on, put the bobbin winder spindle back up into sewing position, and check that Sensor Foot lift is on auto in the SET Menu.
Use the full source procedure and its safety precautions. A short referenced answer is not a substitute for service documentation or qualified electrical/mechanical repair.
Service-manual availability and service-only procedures remain unestablished unless separately cataloged and reviewed.
Answers use this model’s own instruction manual with its stated safety conditions. Where the manual contradicts itself or gives no value, no answer is given. No hands-on testing or replacement-part fit is claimed.
An unanswered question does not mean a part is incompatible. We have not confirmed enough information to recommend it.
Other names, regional versions, production history, further specifications and documents are not fully covered here. Their absence is not a “none exist” finding.
Each answer links to its exact evidence passage below. Open a reference to see the document and page. These links identify the source; they do not include the full manual or its diagrams. Document access is consolidated in the OEM library above.
Published by HUSQVARNA VIKING · "v. 1.0" printed at the foot of the safety page (physical 2); no edition date ("current at the time of printing", physical 71) · English
Checked against the document text.
Document and available links →About this document →PDF page 28 · printed page 28
Open the source document · PDF p. 28 ↗ About this document link
Exact native body text, physical 28 / printed 28: "Your Quilt Designer II sewing machine features the exclusive Husqvarna Viking Sewing Advisor." Scope page. The cover (physical 1) prints "User's Guide / Quilt Designer II" with the Husqvarna VIKING mark only as artwork (checked on the rendered page); its native text is "User's Guide / KEEPING THE WORLD SEWING".
PDF page 71 · printed page 71
Open the source document · PDF p. 71 ↗ About this document link
Exact native Internet Update note, physical 71 / printed 71: names this User's Guide as the Husqvarna Viking Quilt Designer II guide. Applicability context; no edition date is printed.
PDF page 2 · printed page unnumbered
Open the source document · PDF p. 2 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Important safety instructions, physical 2 (no printed folio; "v. 1.0" at the foot).
PDF page 5 · printed page 5
Open the source document · PDF p. 5 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Rear Side legend, physical 5 / printed 5.
PDF page 11 · printed page 11
Open the source document · PDF p. 11 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Bobbin winding and Placing the Bobbin in the Machine, physical 11 / printed 11. The green-bobbin line is in the "Winding from the Needle" section. The placing steps are pointed to, not paraphrased; the "mark facing up" symbol is a glyph and is not quoted.
PDF page 13 · printed page 13
Open the source document · PDF p. 13 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Lowering the Feed Teeth, physical 13 / printed 13 (justification spaces kept as extracted).
PDF page 14 · printed page 14
Open the source document · PDF p. 14 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Presser Feet, physical 14 / printed 14. Checked on the rendered page: A, B, C, D, E, H, J, P and R are separate headings with their own descriptions (the text layer runs the H, J and P image labels together).
PDF page 15 · printed page 15
Open the source document · PDF p. 15 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Presser foot S, Sensor Buttonhole Foot and Changing the Presser Foot, physical 15 / printed 15. Steps pointed to.
PDF page 16 · printed page 16
Open the source document · PDF p. 16 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Needles and Changing the Needle, physical 16 / printed 16 (justification spaces and the fl ligature kept as extracted).
PDF page 17 · printed page 17
Open the source document · PDF p. 17 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Interchangeable d-Cards, physical 17 / printed 17.
PDF page 46 · printed page 46
Open the source document · PDF p. 46 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Utility stitch list, physical 46 / printed 46: a listed stitch value, not a machine maximum.
PDF page 48 · printed page 48
Open the source document · PDF p. 48 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Quilt stitches, physical 48 / printed 48: a listed stitch range, not a machine maximum.
PDF page 50 · printed page 50
Open the source document · PDF p. 50 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Free Motion Quilting and Stippling, physical 50 / printed 50. The setup steps are pointed to, not paraphrased.
PDF page 60 · printed page 60
Open the source document · PDF p. 60 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Decorative Sewing, physical 60 / printed 60: the transparent presser foot B is optional and is a different item from the standard presser foot B on physical 14.
PDF page 69 · printed page 69
Open the source document · PDF p. 69 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Care of the Machine, physical 69 / printed 69. The cleaning steps are pointed to, not paraphrased.
PDF page 71 · printed page 71
Open the source document · PDF p. 71 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Trouble Shooting, physical 71 / printed 71.
PDF page 74 · printed page 74
Open the source document · PDF p. 74 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Optional Stitch d-Cards, physical 74 / printed 74 (the optional cards continue on physical 75-76).
PDF page 76 · printed page 76
Open the source document · PDF p. 76 ↗ About this document link
Only the stated document, exact Quilt Designer II model and cited passage; nothing is transferred to or from the first-generation Quilt Designer or any other HUSQVARNA VIKING model, and no standardized-fit or retail-fit inference. Optional Embroidery Theme, physical 76 / printed 76.
Alex Shick · Founder and editor. Corrections managed by Alex Shick.
This Husqvarna Viking Quilt Designer II guide is based on documents, with AI assistance to organize the information. We have not tested or repaired the machine.
Check the document edition with each answer. A source review date is not a machine inspection date or a promise that the manual is the latest edition.
Contact the SewIndex team or report a correction ↗
The correction address has been tested and its monitoring confirmed. We cannot promise a response or accept every suggested change.
Report an error with the model, document and page · About SewIndex and our method
Answers come from the documents named on this page. They describe those editions, and may not cover later changes to the machine or manual.